![]() The default parameters will run fans at 100% speed at temperatures > 50☌, and run them a 20% speed if < 30☌, which corresponds to the usual recommended drive operating temperature. If you use both fancontrol and HDD fancontrol, be careful not to make them control the same fans. The fancontrol daemon is not needed for HDD fan control to operate. HDD fancontrol and fancontrol are unrelated. On Ubuntu and other Debian derivatives, it is part of the fancontrol package, that you can install with sudo apt-get install fancontrol. To query fan characteristics, you may also need pwmconfig. Install HDD Fan control: python3 setup.py install.If you don't already have it, install setuptools for Python 3.On recent Ubuntu and other Debian derivatives: sudo apt-get install hdparm smartmontools. Install hdparm and hddtemp or smartctl.Install HDD Fan control: pip3 install hddfancontrol.If you don't already have it, install pip for Python 3.Some Linux distributions have a hddfancontrol package available in their repository: Most motherboards and SATA drives fit these requirements. exposes to the OS a sensor to query fan speed.exposes to the OS a PWM to control fan speed.A least one SATA hard drive, that supports:.Can also optionally monitor CPU temperature, and control fan speed accordingly.Can be configured to never set the fans below a certain speed (useful if the fans controlled by HDD Fan control are the only ones available in the chassis).Can be set to stop fans or run them at full speed at customizable temperatures.Can adapt to different fan characteristics.Can automatically spin down drives after a customizable period of inactivity. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |